Ok, so you're finally making good progress. Hopefully you'll have the good luck that I did, and everything kind of falls into place after a while.
I simply used super glue around all the edges and placed the pieces into their spots. You don't have much time to work, but they fit easily so you shouldn't have a problem. REMEMBER - There is supposed to be a gap around all the pieces so make sure that you center them into each opening, hold for a few seconds, and BOOM your ready to move onto the next piece.
Before gluing all the pieces, the areas that you have to cut out holes, hold those pieces up to the area to be cut, trace with a pencil, set the piece asside, and then cut.
Cut the opening slightly larger than the hole on the trim piece, DON'T WORRY, Your trim piece will cover it, but you don't want to risk the inner dome showing through the hole and trim piece.
Finally glue in the remaining trim pieces for your finished look.
No comments:
Post a Comment